CDIF/3 Diagnostic System - Photo coverage

Change language and location.

Photo coverage

As promised, we came to Zbiroża on the 9th of July together with our partner – the company Auto Partner. Zbiroża turned out to be the perfect location for an open air event, despite some temporary cloudiness.

We came, as always, by a company car packed with specialist equipment, information materials and lots of gadgets. First visitors appeared as soon as we had our stand ready. Our special offer with tablet for free attracted, as ever, many people attending the event. Just to remind you, each new purchased CDIF/3 comes with an Android tablet, equipped with a 10'' screen. There were many current customers among the visitors. They also had a chance to get a free tablet (with Android and 7'' screen), provided they went for a 12-month subscription renewal.

Alas, the apprearance of a beautiful racing car temporarily drew the attention of customers away from our stand. On the other hand, it enabled us to take a little rest, join the rest to take a look at the vehicle and say hello to our colleagues at other stands.

Beside the standard presentation of our devices and software, we prepared a little contest as an additional surprise for the visitors. The participants had to give correct answers to 10 questions concerning the CDIF/3 and our company. We intended to reward 10 participants who answered all questions correctly, but all those who answered the questions also received our gadgets as prizes. This includes those giving incorrect answers with minor mistakes - we appreciated their effort.

We would like to invite you to take a look at our comprehensive photo coverage of the event.

It is very important to us to be in touch with you. Enter your telephone number or e-mail address in the field below, and out representative will contact you to answer any questions concerning the CDIF/3.

Enter you telephone number or e-mail address

Shared features of each channel
Sampling	2.4MSPS/channel
Buffer	up to 32K
Time base	10μs/div up to 10min/div
Measuring range	5mV/div up to 2kV/div²
Two standard BNC inputs
Coupling	direct current (DC) or alternating current (AC)
Waveband	1MHz
Impedance	1mΩ/50pF
Max. voltage	±200VPP
Three additional channels for voltage observation at controller's outputs
Three additional channels for current observation at controller's outputs
Two additional channels for signal observation at generator's outputs
One additional channel for battery voltage observation
Functionality
Advanced operation, display and triggering modes
Triggering from measured signal or from parameter/event of the serial diagnosis
Option of simultaneous observation of signals in all or only selected channels
Possibility to display signals in any physical units using free definable scaling functions

² Range above 20V/div available for divider probes and high voltage probes.

One small-signal, precise channel (for sensor emulation)
Output voltage	-2,5V to +2,5V
Current-carrying capacity	up to 50mA
Coupling	direct current (DC) or alternating current (AC)
Sampling	1MSPS
Buffer	up to 32K
Connection socket	BNC³
One high-power channel (for power supply or control)
Output voltage	0V to +25V
Current-carrying capacity	programmable from 0A to 5A
Sampling	1MSPS
Buffer	up to 32K
Connection socket	4mm (so-called banana connector)
Functionality
Direct Digital Synthesis (DDS)
Both channel can operate in asynchronous (separate settings for each channel) or synchronous mode (common settings for both channels)
Ability to generate signals of any shape (arbitral generator)
Built-in library of reference signals, allowing for addition of one's own signals including those recorded with oscilloscope
Ability to generate signals previously recorded with oscilloscope
Automatic operation, triggered operation or operation synchronised by signal from BNC outputs of oscilloscope or parameter/event of the serial diagnosis

³ Output shared with the input of the second channel of the oscilloscope.

Three independent outputs with defined control level ("+"/"-")
Current-carrying capacity	up to 30A/channel¹
Connection socket	4mm (so-called banana connector)
Basic control modes	"ON/OFF", "single pulse", "pulse sequence", "PWM control"
Functionality
Advanced control modes to facilitate control of stepper motors, three-phase motors, petrol injectors, valves, DC motors , etc.
Pulse-duration modulation or pulse-width modulation of signals from oscilloscope input or with serial diagnosis parameters using free definable scaling functions
Synchronous or asynchronous channel operation
Overvoltage, short circuit, overtemperature and overload protection of outputs
Definable overload protection for each output separately

¹ The aggregate current of all channels may not exceed 60A.

Important note: this page uses cookies.
On our website we use cookies to ensure the highest standard of services offered to you. To learn more about cookies, and why we use them on our website, click here.