CDIF/3 + Diagnostic System

Despite the start of summer vacation and holiday season, we continue the tour with our CDIF/3 diagnostic system. We launch yet another DemoCar campaign together with our partner - the company Auto Partner.

The DemoCar campaign is directed towards garages and car repair shops. The idea behind it is a commercial vehicle packed with the state-of-the-art equipment, able to get to almost any garage to let the mechanics not only test and try the CDIF/3 in a practical way, but also go through a training, ask questions and solve problems that they may encounter. Our CDIF/3 diagnostic system is easy to use, but as any tool requires at least basis knowledge on how to operate and use it. It will be our pleasure to provide that knowledge during the DemoCar campaign.

The next meeting will be held on the 9th of July (Saturday) in Hotel Panorama (Ul. Tarczyńska 109a; 96-320 Mszczonów, Poland).

You are more than welcome to visit our stand!

Shared features of each channel
Sampling	2.4MSPS/channel
Buffer	up to 32K
Time base	10μs/div up to 10s/div
Measuring range	5mV/div up to 2kV/div²
Coupling	direct current (DC) or alternating current (AC)
Waveband	1MHz
Impedance	1MΩ/50pF
Max. voltage	±200Vpp
Advanced operation, display and triggering modes
Triggering from measured signal or from parameter/event of the serial diagnosis
Option of simultaneous observation of signals in all or only selected channels
Possibility to display signals in any physical units using free definable scaling functions

Shared features of each channel

Sampling

2.4MSPS/channel

Buffer

up to 32K

Time base

10μs/div up to 10s/div

Measuring range

5mV/div up to 2kV/div²

Two standard BNC inputs

Coupling

direct current (DC) or alternating current (AC)

Waveband

1MHz

Impedance

1MΩ/50pF

Max. voltage

±200Vpp

Three additional channels for voltage observation at controller's outputs

Three additional channels for current observation at controller's outputs

Two additional channels for signal observation at generator's outputs

One additional channel for battery voltage observation

Functionality

Advanced operation, display and triggering modes

Triggering from measured signal or from parameter/event of the serial diagnosis

Option of simultaneous observation of signals in all or only selected channels

Possibility to display signals in any physical units using free definable scaling functions

One small-signal, precise channel (for sensor emulation)
Output voltage	-2,5V to +2,5V
Current-carrying capacity	up to 50mA
Coupling	direct current (DC) or alternating current (AC)
Sampling	1MSPS
Buffer	up to 32K
Connection socket	BNC³
Output voltage	0V to +25V
Current-carrying capacity	programmable from 0A to 5A
Sampling	1MSPS
Buffer	up to 32K
Connection socket	4mm (so-called banana connector)
Direct Digital Synthesis (DDS)
Both channel can operate in asynchronous (separate settings for each channel) or synchronous mode (common settings for both channels)
Ability to generate signals of any shape (arbitral generator)
Built-in library of reference signals, allowing for addition of one's own signals including those recorded with oscilloscope
Ability to generate signals previously recorded with oscilloscope
Automatic operation, triggered operation or operation synchronised by signal from BNC outputs of oscilloscope or parameter/event of the serial diagnosis

One small-signal, precise channel (for sensor emulation)

Output voltage

-2,5V to +2,5V

Current-carrying capacity

up to 50mA

Coupling

direct current (DC) or alternating current (AC)

Sampling

1MSPS

Buffer

up to 32K

Connection socket

BNC³

One high-power channel (for power supply or control)

Output voltage

0V to +25V

Current-carrying capacity

programmable from 0A to 5A

Sampling

1MSPS

Buffer

up to 32K

Connection socket

4mm (so-called banana connector)

Functionality

Direct Digital Synthesis (DDS)

Both channel can operate in asynchronous (separate settings for each channel) or synchronous mode (common settings for both channels)

Ability to generate signals of any shape (arbitral generator)

Built-in library of reference signals, allowing for addition of one's own signals including those recorded with oscilloscope

Ability to generate signals previously recorded with oscilloscope

Automatic operation, triggered operation or operation synchronised by signal from BNC outputs of oscilloscope or parameter/event of the serial diagnosis

Three independent outputs with defined control level ("+"/"-")
Current-carrying capacity	up to 30A/channel¹
Connection socket	4mm (so-called banana connector)
Basic control modes	"ON/OFF", "single pulse", "pulse sequence", "PWM control"
Advanced control modes to facilitate control of stepper motors, three-phase motors, petrol injectors, valves, DC motors , etc.
Pulse-duration modulation or pulse-width modulation of signals from oscilloscope input or with serial diagnosis parameters using free definable scaling functions
Synchronous or asynchronous channel operation
Overvoltage, short circuit, overtemperature and overload protection of outputs
Definable overload protection for each output separately

Three independent outputs with defined control level ("+"/"-")

Current-carrying capacity

up to 30A/channel¹

Connection socket

4mm (so-called banana connector)

Basic control modes

"ON/OFF", "single pulse", "pulse sequence", "PWM control"

Functionality

Advanced control modes to facilitate control of stepper motors, three-phase motors, petrol injectors, valves, DC motors , etc.

Pulse-duration modulation or pulse-width modulation of signals from oscilloscope input or with serial diagnosis parameters using free definable scaling functions

Synchronous or asynchronous channel operation

Overvoltage, short circuit, overtemperature and overload protection of outputs

Definable overload protection for each output separately